Installation: Commercial units
are available in 20 gauge powder coated sheet metal only. Commercial models are easily installed into suspended T-Bar ceilings; the units sit on the T-Bar and are secured with safety chains.
are available in vacuum formed ABS plastic and also available in 20 gauge powder coated sheet metal. Industrial models can be easily secured to structural roof support with safety chains.
There are no ducts, piping or control wiring to install. The Vortex Air System can be hard wired or plugged directly into the nearest 3 prong outlet.
Along with energy savings, increased comfort is also realized by the dispersion of stagnant air, elimination of drafts and humidity resulting in no more steamed up windows. Buildings have a concrete floor, the floor along with furniture and other stationery items will become radiant heaters in winter, since it is always being covered with a warm air flow (no more cold feet).
The Vortex Air System should reduce your daily heating and cooling consumption by up to 30%. (We have reports of as much as 50% savings
in some cases).
Warranty and Services:
The Vortex Air System's heavy-duty motor has a five-year warranty; normal service life is 10 to 15 years based on continuous 24 hour per day operation.
Units are normally delivered in 2 to 4 weeks.
Each Vortex Air System will deliver 1500- 1800 fm free air at full speed. Floor coverage is approximately 2500 sq. ft. per unit (50 ft. x 50 ft.) at full speed, less coverage for special problems and heavy partitioning. Decibel levels: 54A @ 12ft.
Standard Features and Specifications:
A long life custom made self-lubricating bearing in a cast fame.
120 volt AC single phase 60 Hz, .33 to .44 full load amps, 1100 to 1500 rpm.
Units are available in metal and ABS plastic
(custom models are available for special orders).
The commercial unit is 24”X24”X6” and industrial unit is 18”wide X 9” high.
Safe, efficient design: CUL listed, recessed installation, with no exposed blades.